Intro FV24-3"
I created This little Beast based on the Ropatec and Delta concept, I
Did not have good result, I needed to gear it to make any useable
Power, by the time I geared it and mounted the dc motor I then needed
at least 10 kmh for it to spin.
If you have the wind then it is ok, here is the pluses..
-the rpm so low that it does not cause a lot of maintenance
-no noise at all
-easy access
-cheap to build
It would work great on roof tops or on a plat form on a hill.
I created This little Beast based on the Ropatec and Delta concept, I
Did not have good result, I needed to gear it to make any useable
Power, by the time I geared it and mounted the dc motor I then needed
at least 10 kmh for it to spin.
If you have the wind then it is ok, here is the pluses..
-the rpm so low that it does not cause a lot of maintenance
-no noise at all
-easy access
-cheap to build
It would work great on roof tops or on a plat form on a hill.
FV24-3"(vawt,savonius,verticalindturbine,ametek)
FV24-3" Wind Turbine